Job Search Results109 listings were found that matched your search words: Keywords: ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2026/06/08 Monday 11:18PM Pacific Time by ContractJobHunter. )Listings 1 - 25 |
|||
| Go To My Job Tracker | |||
MP&P Engineer 1
Collects information to support definition of requirements for tools, equipment, materials, parts and processes used in the manufacture and engineering design of products. Incorporates changes to specifications and other documents to manage the deployment of materials, parts and processes. Performs tests to qualify new tools, equipment, materials, parts and processes to meet requirements. Assists with activities to qualify suppliers to applicable requirements. Conducts basic analysis to determine performance or reasons for failures of tools, materials, parts or processes. Assists in implementing corrective and preventive actions. Develops basic computer and production systems to satisfy user requirements. Uses project management tools to meet cost, technical, and schedule requirements. Incorporates environmental health and safety, LEAN and Quality principles into (1) materials and processes, (2) research, design and qualification, (3) work procedures and (4) labs and office areas.
Qualifications or Skills:
1. Bachelor of Science degree
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
Job Location: Everett, WA
Rate: TBD
Duration: 7 - months
Start Date: ASAP
Input Date: 06/01/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Network Engineer 3
**Secret Clearance Required to Start.**
The Company Defense, Space & Security (BDS) Command and Control, Battle Management, and Communications (C2BMC) National Team Program is looking for a Network Engineer to join the team in Colorado Springs, CO to support the Ballistic Missile Defense System (BMDS).
The Company Missile Defense Programs support the Missile Defense Agency's (MDA) mission to develop and deploy a layered Missile Defense System to defend the United States, its deployed forces, allies, and friends from missile attacks in all phases of flight. Be a part of our passionate and highly-motivated team who are excited to be on the forefront of defense of our nation.
This position requires candidate acceptance by industry partner resource control board.
Position Responsibilities:
• In this role the candidate will support the implementation, maintenance, and troubleshooting of enterprise network infrastructure.
• This role is responsible for ensuring reliable connectivity across LAN/WAN environments while collaborating with senior engineers on network design and optimization.
• The ideal candidate brings strong networking fundamentals and a hands-on approach to supporting production environments.
• Configure and maintain network devices including routers, switches, and firewalls from vendors such as Cisco and Juniper Networks.
• Monitor network performance and availability, proactively identifying and resolving connectivity, latency, and packet loss issues.Implement and support core networking technologies including VLANs, routing protocols (e.g., OSPF, BGP), and basic network security controls.
• Troubleshoot network incidents across LAN/WAN environments, performing root cause analysis and documenting resolutions.Collaborate with cross-functional IT teams to support network changes, upgrades, and infrastructure projects.
• Candidate will be responsible for traveling to remote locations to lead and perform network installations, independently perform troubleshooting, and provide status updates to Program personnel.
• The candidate may be required to support critical activities outside of standard business hours, including evenings and weekends, as needed. Any other required tasks by the program.
Required Qualifications:
• Generally has 3+ years of related experience and may have a post-secondary degree or training in a related discipline.
• The position requires an IAT Level II 8570 Compliant Certification such as Security+, GSEC, SCNP, SSCP, CISSP, CISA, GSE, SCNA, etc.
• Must have an active Secret Security Clearance. Must be a US Citizen and have/maintain a valid US passport.
• This position requires an CCNA or JNCIA certification.
• Must be a proven network engineer with hands-on mid-level experience and knowledge of network design, development and testing methodologies.
• Must have an understanding of the OSI Model, TCP/IP, routing protocols BGP and OSPF.
• Must have network traffic analysis, diagnostic and troubleshooting skills.
• Must have firewall experience – especially Juniper, Fortinet, and Palo Alto
• Must have experience in UDP multicast, SONET, MSPP, VLANs, GRE Tunnels, and TCP/IP network designs.
• Must have hands on experience with multi-vendor switching routing (Juniper, Cisco), WAN optimizer, TACLANEs, and optical transport equipment.
• Must be an effective communicator with excellent writing and presentation skills using Microsoft Office products, especially PowerPoint and Visio.
Preferred Skills:
• Top Secret Clearance
• CCNP or JNCIP CertificationFoundation, NSX, vSAN, and Aria
• Experience with network automation using Ansible
• Understand standard DOD security practices such as, STIG compliance and system accreditation implementation efforts.
• Prior C2BMC experience
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
Job Location: CO Springs, CO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/13/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Software Engineer - 377557
**Secret Clearance Required to Start.**
The successful candidate for this Software Engineer position will to join the B-1b/B-52 Software team located at Tinker AFB in Oklahoma City, OK and will focus on supporting the Company Defense, Space & Security (BDS) business organization. The engineer will play a crucial role in designing, developing, testing, and maintaining software system and subsystem engineering models utilizing Jira throughout the end-to-end lifecycle that meets industry, customer, and safety standards. You will have the opportunity to review, analyze, and translate customer requirements and technical specifications for stakeholder use. The Software Engineer will collaborate with a diverse engineering team to design, develop, and deploy operational flight software used to monitor and test the system. Your expertise will be instrumental in developing maintaining, enhancing, and optimizing system and subsystem components and functionalities for systems integrations. Additionally, you will be a system and subsystem resource to team members, who will debug and resolve issues identified to ensure the reliability and efficiency of software products.
Required Experience:
- Ability to code in C and/or ADA
- Embedded software design experience preferred
- Experience with JIRA
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Tinker AFB, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 06/02/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Manufacturing Planner 4 - 377563
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
Manufacturing Planner 4 - Electrical/Electronics
Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Supports mechanics to provide clarification related to planning and the applicable engineering drawings and specifications.
Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction. Work statement is a non-managerial role, non-leadership role
BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE):
• Relevant work experience requirement breakdown
- Bachelor's degree 4+ yrs
- Associate's degree 6+ yrs
- HS/GED 8+ yrs
• Manufacturing Planner experience
• CAD Software experience
• Analyze & Interpret Engr Data, read 2d and 3d drawing and specs,
• Manufacturing Engineering processes
• Proficient in computer skills including Microsoft
PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):
• Gold ESP & MESCI experience
• WIRS experience
Job Location: San Antonio, TX
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 06/06/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Reliability, Maintainability, & System Health (RM&SH) Engineer 4
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
The Company is actively seeking a Reliability, Maintainability, & System Health (RM&SH) Engineer for a Weapons Program in Saint Charles, Missouri.
At Company, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. As a member of RM&SH, you will support the design, manufacture, test, and/or sustainment of state-of-the-art technology. In joining this team, you will be part of an outstanding group of engineers and analysts making history in the aerospace industry.
Position Responsibilities including but not limited to:
• Analyze customer provided requirements and develop a reliability engineering program to achieve customer reliability objectives.
• Allocate top level reliability quantitative requirements to design teams. Performs reliability predictions to track performance.
• Analyze projected product utilization and calculates cumulative effect on final system reliability of individual part reliabilities.
• Perform failure mode and effect analysis and formulates mathematical models, to identify items posing excessive failure and safety risks and support proposed changes in design.
• Develop computer models and uses the results to analyze, predict and adjust design to maintain and/or improve system reliability.
• Develop, administer, and maintain a Failure Reporting and Corrective Action System (FRACAS) database.
• Participate in recurring Failure Review Board (FRB) meetings with internal and external stakeholders, including Government customers.
• Active participant on design teams, provides guidance and recommendations to designers and management to ensure reliability objectives are met.
• Interface with the customer and management at major design review meetings to provide reliability findings and recommendations.
• Determine test profiles for units requiring environmental type testing and specifies specific objectives of the tests and defines successes criteria.
• Provide inputs to proposals for submittals to customers. Review subcontractors' proposals for reliability program and submits evaluation for decision.
• Review engineering specifications and drawings, proposing design modifications to improve reliability within cost and other performance requirements.
• Support proposal activities that will impact the Reliability and Maintainability scope of work.
• Provide technical support to various Weapons programs including SDB, JDAM and Missile programs.
This position is 100% onsite.
Basic Qualifications (Required Skills/Experience):
• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.
• Level 4: typically, 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
• Experience with RM&SH engineering principles (RM&SH requirements, predictions and performance.
• Experience with Failure Reporting, Analysis and Corrective Action System
• Experience with performing failure analysis
• Ability to collaborate with cross-functional teams at multiple organizational levels in a dynamic, fast-paced environment
• Experience with Microsoft Office Tools: Word, Excel, PowerPoint, etc.
Preferred Qualifications (Desired Skills/Experience):
• Experience using the Systems Engineering V implementing a System onto a product
• System Engineering requirements and verification experience.
• Able to lead by influence outside formal reporting relationships.
• 2+ years of Reliability, Maintainability, and System Health experience
• 2+ years of working experience in Failure Mode Effect Analysis, Reliability & Maintainability Predictions, and/or Reliability Testing activities
• Master’s degree in Engineering, Statistics, Mathematics, Systems Engineering or related disciplines.
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
Job Location: St Charles, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/19/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Software Engineer 4 - 377512
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
Designs, develops, tests, and maintains safety-critical embedded software across the full product lifecycle, ensuring compliance with industry, customer, safety, and regulatory requirements. Translates customer and sDesigns, develops, tests, and maintains safety-critical embedded software across the full product lifecycle, ensuring compliance with industry, customer, safety, and regulatory requirements. Translates customer and system requirements into robust, testable software architectures and detailed designs, implements and optimizes software components and algorithms for system integration and performance, and creates and maintains comprehensive documentation including requirements traceability, design descriptions, test plans, and release notes. Leads verification and validation activities (unit, integration, system, regression), produces certification evidence and safety artifacts, and debugs and resolves defects and field issues to maximize reliability and availability. Responds to user inquiries and technical support tickets, incorporates user feedback into prioritized improvements, and evaluates and adopts emerging technologies, tools, frameworks, and regulatory changes to keep the software and processes current. Establishes, monitors, and continuously improves development processes, toolchains, and KPIs to align teams with organizational objectives and industry benchmarks, plans and executes R&D projects and feasibility studies, and provides domain expertise on software architecture, safety analyses, compliance, and lifecycle practices. Performs software project management activities including schedule tracking, risk management, and resource planning, and manages software suppliers and partners by defining requirements, evaluating deliverables, and monitoring supplier performance to ensure product and process compliance with project plans and industry standards. System requirements into robust, testable software architectures and detailed designs, implements and optimizes software components and algorithms for system integration and performance, and creates and maintains comprehensive documentation including requirements traceability, design descriptions, test plans, and release notes. Leads verification and validation activities (unit, integration, system, regression), produces certification evidence and safety artifacts, and debugs and resolves defects and field issues to maximize reliability and availability. Responds to user inquiries and technical support tickets, incorporates user feedback into prioritized improvements, and evaluates and adopts emerging technologies, tools, frameworks, and regulatory changes to keep the software and processes current. Establishes, monitors, and continuously improves development processes, toolchains, and KPIs to align teams with organizational objectives and industry benchmarks, plans and executes R&D projects and feasibility studies, and provides domain expertise on software architecture, safety analyses, compliance, and lifecycle practices. Performs software project management activities including schedule tracking, risk management, and resource planning, and manages software suppliers and partners by defining requirements, evaluating deliverables, and monitoring supplier performance to ensure product and process compliance with project plans and industry standards.
Qualifications:
Develop Mission Systems Software Architecture
Fluency in both UML and SysML
Fluency in MBSE practice and Model Driven Software Engineering
Ability to translate customer needs into non-functional requirements/quality attributes
Ability to translate non-function requirements/quality attributes into known software architecture patterns
Ability to manage and trade off multiple concurrent issues, ambiguities, and contradictions in non-functional requirements/quality attributes
Reverse Engineering Software Architecture of legacy code
Refactoring Software Architecture
Product Line development/ Product Line Software Architecture
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years'
related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 05/04/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Embedded Software Engineer 3
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
Position is 100% on-site.
The Company is currently seeking an Experienced Embedded Software Engineer to support our Precision Engagement Systems located in Saint Charles, MO. The Precision Engagement Systems organization is a strong and growing business that produces a variety of precision-guided weapons, which are employed around the world to support the defense of the United States and more than 30 U.S. allied countries.
Our leadership team is committed to attracting and developing top talent to support critical Direct Attack (DA) and Cruise Missile Systems (CMS) missions. Aligned with customer objectives, we deliver tailored software solutions through our exceptional workforce. In Saint Charles, MO, we support Direct Attack weapons (JDAM, SDB, MOP, HAAWC and derivatives) and Cruise Missiles (SLAM-ER, Harpoon legacy and development weapons) deployed on a range of military aircraft and select ground platforms.
We are seeking talented experienced software engineers to work with a multi-discipline engineering team to design and develop software solutions for these platforms. Engineers on this team work in all phases of the software development lifecycle. We are actively building the team to achieve a growing work scope that includes implementing real-time embedded software applications, creating models and simulations, deploying DevOps methodologies and development environments, developing support applications, and maintaining software configurations and processes for an Agile development lifecycle.
Position Responsibilities:
• Collaborate with a multi-discipline engineering team to create and implement Operational Flight Program software solutions
• Contribute in all phases of the software development lifecycle in an Agile development environment
• Develop solutions using Ada, C#, and Python
• Test your software and assist system level testing to verify correct software functionality
• Analyze problem reports and troubleshooting software defects
• Develop leadership skills and experience
• Opportunity to work directly with United States Air Force and Navy customers
Basic Qualifications (Required Skills/ Experience):
• 3+ years of experience in real-time embedded software development
• 3+ years of experience in developing software using Object Oriented principles
• 3+ years of experience working in a team environment
Preferred Qualifications:
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, computer science, computer engineering, software engineering or equivalent experience strongly preferred
• Active U.S. secret clearance
• Experience with Ada, Python, or C#
• Experience working in an Agile software development environment
• Experience with Git or a similar version control system
• Experience developing and tracing software requirements
Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: St. Charles, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 04/28/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Space Survivability/Radiation Effects Engineer 5
**Secret Clearance Required to Start.**
Position is hybrid: 2 days a week onsite
We are seeking an Experienced Space Survivability/Radiation Effects Engineer to support natural and man-made radiation environment-related tasks through all satellite program phases. The successful candidate will interface with all technical disciplines in a team environment to trade factors such as survivability, cost, weight, and technical risk in arriving at the final design.
Primary Responsibilities
• Provide subject matter expertise in the technical area of nuclear radiation hardness on a large portfolio of space programs.
• Interface with program office representatives and system engineers representing other disciplines to ensure that radiation-related concerns are adequately addressed.
• Ensure that unit and system level designs appropriately consider radiation-related effects such as total dose, displacement damage, ELDRS, single event effects, internal charging, IEMP, SGEMP, and TREE.
• Perform and document unit and vehicle level analyses.
• Plan and conduct testing at the piecepart, unit, and vehicle levels to support design and verify compliance with radiation-related requirements.
• Interface with personnel at various radiation test facilities across the country to advocate for required test time.
Required Skills
• Ten years of experience in space environments/radiation effects.
• Experience in dose rate testing, total ionizing dose testing, displacement damage testing, and SEE testing of electronics
• Experience in prompt dose analysis of electronic units
• Experience working on government contracts with nuclear effects environment requirements
Preferred Skills:
• Experience with various pieces of test equipment such as oscilloscopes, spectrum analyzers, network analyzers
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
Job Location: El Segundo, CA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 03/06/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Project Engineer 4 - 377348
**Secret Clearance Required to Start.**
100% on-site.
Provides the Engineering leadership to a team representing multiple skill areas, which may include internal and external resources and customers. Develops statement of work (SOW) to satisfy research and development, ongoing and new business requirements. Works with customers and management to obtain approval. Responds to changes to SOW, assesses the impact and negotiates proposed changes to determine modifications to the deliverables, resources, costs and schedules. Leads project execution to complete the work statement. Identifies performance metrics. Plans, identifies, and coordinates resources required over the life of the project or program. Defines plans for risk mitigation and opportunity. Compares actual results to baseline plan to assess project performance, efficiencies, productivity and lessons learned. Provides technical, business and integration leadership for the development and execution of project or team plans. Works under minimal direction.
Basic Qualifications (Required Skills/Experience):
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 3+ years experience leading or managing multi-disciplinary engineering projects teams
Preferred Qualifications (Desired Skills/Experience):
• Project Management Professional Certification
• Experience with proposal development and contract negotiations
• Experience with Export Compliance or International programs
• Experience developing and tracking program plans/schedules and budgets for technical projects
• Project management experience in an engineering environment
• Experience in engineering project planning or project management
• Experience supporting weapons systems
• Experience working directly with government customers
• Experience collaborating across functions and organizations
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: St. Charles, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 02/11/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Equipment & Tool Engineer 2
Company is seeking Equipment and Tool Engineers to support multiple positions across our teams in Puget Sound, Washington.
A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency. They will also have a strong desire to be out on the production floor, interacting with mechanics, safety, and tool makers, and directly supporting the production system. In Production Engineering, we need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity.
This position is a Production Engineering role and requires direct interfacing with the people and equipment on the production floor. A typical day could include:
• Spending up to 8 hours on feet standing/walking on the production floor
• Climbing ladders or stairs to access equipment
• Working at heights or in tight spaces
• Wearing required PPE
•
Primary Responsibilities:
• Investigates and develops equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
• Performs tool liaison activities to support tool fabrication and production use
• Participates in design reviews, collects design requirements, creates and revises drawings and models to support the build plan.
• Creates specifications and purchase requests for the acquisition of new equipment and tooling from external vendors
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and supports user training development.
• Manages budgets and schedules to deliver equipment and tooling solutions to customers
Required Skills:
• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry
• 1 or more years of related work experience or an equivalent combination of education and experience
Preferred Skills:
• 2 or more years of experience working in a production environment
• Mid-Level: 3 or more years of related work experience or an equivalent combination of education and experience
• Senior Level: 5 or more years of related work experience or an equivalent combination of education and experience
• 3+ years of hands-on experience as a Pressure Vessel Design Engineer.
• 2 or more years of experience working in a production environment
• 2 or more years of Project Management experience
• Working knowledge and application of pressure vessel codes such as ASME Section VIII and its related ASME/ANSI Codes.
• Strong knowledge and application of NBIC codes Part 1, 2, 3, & 4
• Application of piping codes such as ASME B31.1 and/or B31.3.
• Strong understanding of pressure vessel fabrication processes and maintenance procedures.
• Strong understanding of material mechanics & behaviors under conditions such as extreme temperatures and vibrations.
• Strong understanding of non-destructive examination procedures such as magnetic particle examination and ultrasonic testing.
• Knowledge of welding procedures and testing requirements.
• Experience and adeptness in the application of thermodynamics and fluid mechanics principles.
• Hands-on experience with the design of autoclaves for use in composite curing processes.
• Design of quick actuating closures or breech lock door mechanisms.
• 5 or more years of experience working in a production environment
• 5 or more years of 3D modeling experience
• 5 or more years of GD&T experience
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not
required, accreditation standard through advanced technical education
Job Location: Renton, WA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 03/23/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Structural Analysis Engineer 3 - 377314
Company is hiring contractors as Airframe Stress Analysis Engineer (Experienced) to work at their Company Commercial Airplanes Washington Design Center in our Structures Organization based in Everett, WA or Renton, WA. 100% on-site.
As a Structures Analysis contract engineer, you possess a solid understanding of airplane structural analysis methods and tools for both metallic and/or composite structures. You will ensure the airplane has sufficient strength to endure all conditions encountered during its operational life. The analyst also ensures the airplane structure meets all other design requirements including fail-safety, durability and damage tolerance where applicable. Positions could include the following analysis commodities: Fuselage, Wing/Empennage, Propulsion Structures, Systems Stress, Interiors Stress, Seats Stress
- Coordinates with other engineering groups to establish the product's environment.
- Support product design and verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.
- Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Bachelor's degree in one of the following engineering disciplines: Mechanical, Aerospace, Aeronautical, Civil, or Structural Engineering degrees.
- 8+ years related work experience in aircraft stress analysis.
Minimum of a Bachelor of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 9 - months
Start Date: ASAP
Input Date: 01/12/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Nondestructive Evaluation Technical Analyst 5
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
100% on site.
Company is looking for a Nondestructive Evaluation Technical Analyst to join our team in Berkeley, MO as the NDE Lab focal. We are looking at a range of experience, including Mid-Level and Lead level NDE Technicians to lead Nondestructive Evaluation testing in the Berkeley, MO. lab. The position is contact to permanent hire after six months of service.
The Midwest Nondestructive Evaluation (NDE) and Fleet Support team is part of the BDS Engineering department. We are an engineering team supporting space, commercial and defense air vehicles programs such as: 787, 777X, F-15, F-18, AV-8B, T-7A, T-45, MQ-25, KC-46, P-8, B-52, B-1, KC-135, Executive Transport platforms, Commercial Crew Transportation, Space Launch, and weapon systems. Our team is responsible for NDE Engineering supporting of pre-production, current production, and post-production efforts.
Along with supporting the aforementioned space commercial and defense programs; the team provides supplier standup/certification, fabrication support/trouble-shooting and fleet support activities across the Company value stream. The team also conducts NDE research and development for both internal and external customers.
Position Responsibilities:
• Apply nondestructive evaluation (NDE) methods/approaches, such as acoustic, electromagnetic, thermal, optical, and radiologic principles, in performing complex analysis and evaluation of parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications.
• Leads, coordinates, and conducts complex analysis of failed parts and processes to reduce or eliminate future failures.
• Generates test plans, identifies, and categorizes failure, determines root cause and documents results and recommendations.
• Maintain compliance with contractual and regulatory obligations.
• Leads the proposal, development, and validation of revisions to procedures and specifications.
• Determines suitability of parts, materials and processes and coordinates resolution of complex issues with suppliers and customers.
• Support audits, root cause analyses, and failure investigations as a subject matter expert.
• Supports continuous improvement of products and processes by leading the design, development, fabrication, testing, evaluation and implementation of new concepts and technology.
• Provide technical guidance and mentoring to junior engineers and technicians.
• Supports the Team Lead and work statement, assist defining strategies and/or provides consultation.
Basic Qualifications (Required Skills/Experience):
• 5+ years of experience in Nondestructive Evaluation
• Excellent written and oral communication skills
• Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics).
• ASNT Level 2 in Eddy Current and Ultrasonic nondestructive evaluation testing methods
• Ability to travel 10% of the time minimum
Preferred Qualifications (Desired Skills/Experience):
• 5+ years of hands-on experience in NDE/NDT engineering in a regulated industry (e.g., aerospace, defense, energy).
• Experience with nondestructive evaluation processes (e.g., ultrasonic testing, radiography, eddy current testing, and penetrant inspection)
• ASNT Level 2 in multiple nondestructive evaluation processes (e.g., ultrasonic testing, radiography, eddy current testing, and penetrant inspection)
• Experience working in multi-discipline teams, a strong desire to work with technical and non-technical customers.
• Strong understanding of materials behavior, stress analysis, and fracture mechanics.
• Experience with project management tools
• Excellent time management skills to manage several simultaneous projects effectively and across various geographical locations.
• Active / Current Secret U.S. Security Clearance preferred but not required.
Education/experience typically acquired through advanced education (e.g. Associate) and typically 9 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+7 years' related work experience, 11 years' related work experience, etc.).
Job Location: Berkeley, MO
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 03/06/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Product Review Engineer 3 - 377391
The Liaison Engineering Organization is seeking Mid-Career Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington as well as Portland, Oregon. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.
This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.
Position Responsibilities:
Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
Develops and implements product/process improvements.
Supports Integrated Product Teams (IPT) and participates in design reviews.
Represents the engineering community from initial build through the production and post-production environment.
Ensures supplier and build partner compliance with Boeing standards.
Develops customer correspondence for continued safe operation and maintenance of equipment.
Participates in on-site disabled product repair teams, accident investigation and support teams.
Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
Designs interim structural repairs and conducts static strength analysis.
Develops non-destructive test procedures, tools and standards.
This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.
This position participates in the approximately 9-month Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Puget Sound sites during the training rotation.
Shift: This position is for multiple shifts and may require off shift, weekend, and travel assignments.
The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.
Basic Qualifications (Required Skills/Experience):
Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
5 or more years of experience in structures, systems, design, or production engineering.
Preferred Qualifications (Desired Skills/Experience):
5 or more years of experience working with MRB (Material Review Board) activities related to aircraft systems or structures.
Hands-on experience with materials and manufacturing processes.
Prior BCA Engineering Material Review Board (MRB) certification
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 10 - months
Start Date: ASAP
Input Date: 03/12/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Manufacturing Planner 3 - Electrical - 377319
Job Description: 777-9 program is looking for Manufacturing Engineers to enable aircraft modifications to support Certification Flight Testing for Type Inspection Authorization (TIA). This is a very critical activity in support of the overall Certification of the 777-9.
Primary Responsibilities:
- Tiger Team Member on critical Company Flight Test Project
- Installation Plans for configuration changes (test specific and production).
- Coordination across ME teams for PRR IP creation / revision.
- Review IPs for quality – e.g. missing functional tests, missing BOM items, etc.
- Identifying and planning removals.
- Identifying opportunities to reduce scope (e.g. smaller, more specific functional tests).
- Reviewing tooling requirements for compatible with flightline operations (i.e. not factory specific).
Required Skills:
- Assembly & Installation (A&I) Manufacturing Engineering (ME).
Preferred Skills:
- Systems, Electrical and Propulsions are preferred (not required).
- CMES, PDM, CAPP, CMES (IP edit and NCO generation), ENOVIA, CATIA, IVT, Etc.
- Change incorporation instructions (e.g. PRR, LCCX, mods / service bulletins), removals, and 777 airplane configuration knowledge.
Education/experience typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc.).
Job Location: Everett, WA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 01/16/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Manufacturing Engineer 5
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
These positions are for both 1st and 2nd shift. Candidates must be open to both shifts and will be assigned one or the other at time of offer.
100% onsite.
Company is seeking Senior Experienced Manufacturing Engineers located in Berkley, MO.
At Company St. Louis, we lead in aerospace innovation and advanced manufacturing for critical defense and commercial platforms. Our facility delivers complex assemblies and systems with a focus on safety, quality, sustainability, and technical excellence.
Position Overview: We are seeking a senior, Level 5 Manufacturing Engineer to provide technical leadership across manufacturing programs and production lines. This role emphasizes enterprise-level manufacturing strategy, process architecture, and organizational influence rather than focus on any single subsystem. The ideal candidate will lead cross-functional initiatives that increase throughput, reduce cost, improve quality, and enable production scaling for complex aerospace products.
Key Responsibilities:
• Provide technical leadership and strategic direction for manufacturing process development, qualification, and sustainment across multiple programs and product lines.
• Define and implement manufacturing strategies (automation, lean, DFMA, digital thread) that improve throughput, reduce cost, and enhance quality and reliability.
• Lead production readiness planning, risk identification and mitigation, and readiness metric definition for program ramps and sustainment.
• Architect and drive investments in tooling, workstations, automation, and capital equipment; lead business cases and justification for manufacturing improvements.
• Establish and maintain standardized processes, best practices and controls across production lines; champion scalable, repeatable solutions.
• Lead complex problem solving and continuous improvement activities (root cause analysis, corrective actions, Six Sigma methodologies).
• Integrate manufacturing considerations early into product and process decisions; represent manufacturing in design and program reviews.
• Mentor, develop and provide technical oversight to engineering teams; review and approve engineering deliverables, installation plans, and process documentation.
• Use data analytics, simulation and model-based approaches to validate processes, balance flow, and support capacity planning.
• Coordinate cross-functional teams (design, quality, supply chain, production, industrial engineering) and external partners to deliver on schedule and on budget.
Basic Qualifications (Required):
· Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.
• 12+ years of relevant work experience with a Bachelor’s degree OR an equivalent combination of work-related experience and technical education.
Preferred Qualifications (Desired Skills/Experience):
• Advanced degree (M.S. or Ph.D.) in Mechanical, Manufacturing, Aerospace or related engineering discipline.
• 15+ years of progressive manufacturing engineering experience in aerospace/defense or other complex, high-reliability manufacturing environments.
• Strong experience with process qualification, lean manufacturing, automation/robotics, and digital manufacturing tools.
• Demonstrated capability in project and program leadership, including schedule, budget and stakeholder management.
• Experience with manufacturing engineering and factory tools such as CREO, CATIA, MES, DELMIA, FlexSim, ProModel, or equivalent.
• Familiarity with Manufacturing Execution System Common Image (MESci) and model-based enterprise practices (MBD/MBE).
• Experience leading supplier integration, qualification and production transfers.
• Proven track record of mentoring engineers and reviewing/approving engineering work products.
• Certifications or training in Lean, Six Sigma, Systems Engineering or Project Management (e.g., PMP, Lean/Six Sigma Black Belt) are a plus.
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Berkeley, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 04/24/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Electronic Design and Analysis Engineer 3
Our team provides support to the airplane's Electronic Flight Bag (EFB), Corenetwork, Avionics Gateway (AG), CWLU, Maintenance Access Terminal (MAT) across various Company Airplane models. Our work helps airlines access real-time airplane data that they need to make important decisions. We work closely with the testing team to help troubleshoot and find the root cause of problems that can arise within these systems. We are a fun and collaborative team located in Everett, WA and work 100% onsite. We are seeking a experienced Electrical Network and Digital Connectivity System Product Support Engineer.
This role will be responsible for designing, implementing, and maintaining robust network systems and digital connectivity solutions to support our cutting-edge aerospace projects. The ideal candidate will be able to work independently, have proficient understanding of network and software systems, and an understanding of how those systems deploy within different architectures across multiple different airplane models. This person will be able to translate high-level technical requirements to specific architecture and operational specifications, including the physical integration of complex electrical systems and components into our airplanes, as well as communicating with customers and stakeholders expanding across multiple organizations to implement high quality and service ready hardware and software systems. You will validate designs through both laboratory and airplane testing and work with aircraft systems from initial concept through certification, delivery, and production lifecycle.
Key Responsibilities:
Develop and document moderately complex electronic and electrical system requirements
Designs hardware, software and interface specifications
Coordination with suppliers on the development of hardware, software and interface specifications
Tests and validates to ensure system designs meet operational and functional requirements
Assists in monitoring supplier performance to ensure system integration and compliance with requirements
Solves problems concerning fielded hardware and software over the entire product lifecycle
Research specific technology advances for potential application to company business needs
Participate as a contributing member to any airplane installation designs and certification efforts for Network and Digital Connectivity Systems and Airplane Programs
Develop operational use cases of systems and how to evaluate them
Utilize Model Based System Engineering (MBSE) to develop architecture mapping and set the stage for simulated test environments
Develop and execute detailed, integrated test procedures/plans
Define and configure Lab setup for Testing
Create software scripts to support and/or automate testing procedures and analysis
Basic Qualifications
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.
5+ years of related work experience or an equivalent combination of education and experience
Work with Linux/UNIX Operating Systems
Knowledge of network, hardware and software systems and technical architecture.
Experience in systems engineering involving system requirements, functional decomposition and allocation, integrated design, analysis and evaluation, verification.
Preferred Qualifications
Knowledge of FAA certification.
Experience with system design and integration during an airplane development program.
Experience working and communicating with cross functional teams.
Demonstrated project management skills within a fast paced highly integrated environment.
Experience with Model Based Development tools.
Experience in computer networking systems, with a strong ability to troubleshoot and debug issues in aerospace software and hardware environments.
Ability to read software logs and code
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 03/30/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Software Engineer 5 - Systems
**Secret Clearance Required to Start.**
The Company is looking for multiple Software Systems Engineers to join the Ground Software Engineering team located in El Segundo, CA. This position will focus on supporting the Company Defense, Space & Security Satellite Systems Software Engineering organization.
Our team creates the software tools and services for the world’s highest performing satellite/ground systems for USG and Commercial customers. We work with space customers in the development of the next generation ground systems.
This is an opportunity to work in a rapid development environment using modern technology, architecture, and tools. Our team works within an agile methodology using a CI/CD environment; integrated with automated testing, vulnerability, & quality scanning capabilities. Your skills and interests will be matched to available roles within the program IPT inclusive of Product Owner and Team Lead.
This senior position requires proven experience within the software ecosystem, a unique background of project experience, and the clear exhibition of superior judgment and decision making to engineer new solutions and capabilities. Critical thinking and troubleshooting skills are required!
Position Responsibilities:
• Develop and maintain requirements, architecture, algorithms, interfaces, and design for high-performance Command and Control (C2) software solutions.
• Lead software development activities in the scaled agile methodology utilizing a DevSecOps environment. Supporting software development activities and integrating completed software components into a fully functional software system.
• Support progress demonstration presentations to customer representatives and program/IPT leadership.
• Perform day-to-day activities in the areas of Product Owner/Technical Leadership, Architecture, Design and Direction of software product(s)
• Support IPT by implementing a structured approach to defining and meeting a development and integration schedule alongside a rigorously managed cost baseline.
Required Skills:
• Bachelor’s Degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 14+ years of related work experience OR Bachelor’s Degree and 18+ years of directly related work experience OR 22+ years of related, relevant experience
• 5+ years of experience with systems engineering or software development on space-based or ground-based systems
• 3+ years of experience leading software development projects
• 3+ years of experience with software development using either Java, C++, or Python
• Experience with Flight Dynamics / Orbital Analysis or Satellite Management Systems or Ground control management
Preferred kills:
• Experience as a Product Owner/Technical Lead
• Experience with database technologies (SQL/NoSQL), messaging systems (e.g., Kafka, ActiveMQ), and data streaming technologies (e.g., CCSDS).
• Familiarity with containerization tools (e.g., Docker, Kubernetes) and orchestration platforms.
• Experience designing and implementing CI/CD pipelines in GitLab to automate testing, builds, and deployment workflows.
• Experience with various formal acceptance testing activities (e.g., Formal Qualification Test -FQT, Factory Acceptance Test - FAT, Site Acceptance Test - SAT)
• Active TS/SCI or DoD Top Secret clearance
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard
Job Location: El Segundo, CA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 04/28/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Systems Engineer 3
Join Company as a Proposal Board Engineer in Long Beach, California. In this pivotal role, you will validate technical content and develop proposal estimates for modifications across a diverse range of commercial aircraft. Be part of a dynamic team that is shaping the future of aerospace technology, where your contributions will inspire the next generation of explorers.
Position Responsibilities:
• Develop Statement of Work (SOW), for Request for Proposals and Catalogs, containing engineering hours, flow time, and parts requirements in support of BGS Modifications Services.
• Determine affected groups and supporting organizations, including engineering groups external to Modifications.
• Define airplane starting configurations and system functionality while utilizing job classification and training to perform technical research to confirm description of change accuracy.
• Identifying prerequisites that must be completed concurrently or before the customer requested change can be incorporated.
• Develop preliminary risk assessments, resolve/validate type change certification (major/minor), and identifying concurring E-UM/DAE as appropriate to mitigate project risk.
• Classify each proposal with a project category as defined within BPI-2798 Safety Assessment Requirements for Post-Manufacturing Airplane Modifications of Commercial Operation.
• Provide analysis of projects, schedules and documented lessons learned for incorporation into future projects to increase proposal quality to capture and foster business growth.
• Coordinate with various design groups ensuring that proposals align reasonably with projected engineering resource constraints.
• Excellent verbal and written skills with ability to communicate task progress and challenges within team and with technical leadership, both internal and external
Required Skills:
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• Bring your expertise with 5+ years of experience in Aviation (Engineering or Maintenance Functions) to our innovative team.
Preferred Skills:
• We work with a diverse set of technologies, but most of all we value engineers who are eager to learn new ways to deliver value to our customers. We foster an inclusive environment where diverse perspectives are valued, and collaboration is key to our success.
• Knowledge of one or more airplane systems (e.g. Airframe, Avionics, Components, Power plant, Structures, Interiors).
• Experience with BCA production systems and BGS modifications services is highly valued, as it directly impacts our ability to deliver timely and effective solutions to our customers.
• General knowledge of the airplane certification process
• Bring your expertise with 5+ years of Engineering experience in BCA, BDS or BGS
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
Job Location: Long Beach, CA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/04/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Safety & Airworthiness Specialist 4
Company In-Service Safety Organization is looking for an Airworthiness & Regulatory Specialist (Mid-Level, or Senior) to join our team in Everett, Washington.
As an investigator in the Company Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Company product safety by maintaining and restoring compliance with regulatory requirements.
Investigations typically follow the Company Problem Solving Model (BPSM) process, which provides a structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.
Position Responsibilities:
· For any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process.
· We coordinate closely with Company functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
· We work with the functional groups within Company to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
· We coordinate closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
· We partner with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Company Enterprise.
We value the ability to communicate complex technical issues with a large variety of audiences, to lead a group of diverse engineers and non-engineers, and to apply airplane level thinking to a variety of technical issues.? As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.
A successful Senior candidate will have the following qualifications:
· Strong written and verbal communication skills
· Strong ability to interact and communicate with Company senior management and technical peers from external Customers, including airlines and regulatory agencies
· Ability to lead, influence, and mentor a diverse team
· Intrinsic aptitude for taking initiative, leading cross functional teams and complex projects
· Ability and willingness to take ownership of, and facilitate, work activities to ensure they are completed accurately, efficiently, and in a timely manner
This position is expected to be 100% onsite.? The selected candidate will be required to work onsite at Everett, WA.
Basic Qualifications (Required Skills/Experience):
· 10+ years related work experience or an equivalent combination of education and experience
Preferred Qualifications (Desired Skills/Experience):
· Working knowledge with Root Cause Corrective Action (RCCA) tools such as 5-Whys or Fishbone, and/or the Company Problem Solving Model (BPSM)
· 1+ years of experience with commercial airplane operation, certification, safety requirements and procedures
· Working knowledge of FAA Regulatory Compliance and ODA procedures per 8100.15
· 1+ years of experience working with FAA or other regulatory agencies
· 1+ years of experience in Commercial Airplane-Systems design or analysis (e.g. Flight Controls, Hydraulics, Avionics, Fuels, etc.) or Systems Integration
· Pilot’s license
· Airframe & Powerplant (A&P) License
Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 10 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+8 years' related work experience, 14 years' related work experience, etc.).
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/04/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Product Review Engineer 4 - 377388
The Liaison Engineering Organization is seeking Expert Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington as well as Portland, Oregon. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.
This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.
Position Responsibilities:
Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
Develops and implements product/process improvements.
Supports Integrated Product Teams (IPT) and participates in design reviews.
Represents the engineering community from initial build through the production and post-production environment.
Ensures supplier and build partner compliance with Boeing standards.
Develops customer correspondence for continued safe operation and maintenance of equipment.
Participates in on-site disabled product repair teams, accident investigation and support teams.
Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
Designs interim structural repairs and conducts static strength analysis.
Develops non-destructive test procedures, tools and standards.
This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.
This position participates in the approximately 9-month Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Puget Sound sites during the training rotation.
Shift: This position is for multiple shifts and may require off shift, weekend, and travel assignments.
The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.
Basic Qualifications (Required Skills/Experience):
Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
9 or more years of experience in structures, systems, design, or production engineering (Experienced).
Preferred Qualifications (Desired Skills/Experience):
9 or more years of experience working with MRB (Material Review Board) activities related to aircraft systems or structures (Experienced).
Hands-on experience with materials and manufacturing processes.
Prior BCA Engineering Material Review Board (MRB) certification
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 10 - months
Start Date: ASAP
Input Date: 03/12/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Airworthiness & Regulatory Engineer 3
Company In-Service Safety Organization is looking for an Airworthiness & Regulatory Engineer (Mid-Level) to join our team in Everett, Washington.
As an engineer in the Company Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Company product safety by maintaining and restoring compliance with regulatory requirements.
Investigations typically follow the Company Problem Solving Model (BPSM) process, which provides a structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.
Position Responsibilities:
• For any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process.
• We coordinate closely with Company functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
• We work with the functional groups within Company to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
• We coordinate closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
• We partner with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Company Enterprise.
We value the ability to communicate complex technical issues with a large variety of audiences, to lead a group of diverse engineers and non-engineers, and to apply airplane level thinking to a variety of technical issues.? As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.
A successful Mid-Level candidate will have the following qualifications:
• Strong written and verbal communication skills
• Ability to work effectively with a diverse team
• Intrinsic aptitude for taking initiative, leading cross functional teams and projects
• Ability and willingness to take ownership of, and facilitate, work activities to ensure they are completed accurately, efficiently, and in a timely manner
This position is located in Everett, WA. The selected candidate must be able to work 100% onsite.
Basic Qualifications (Required Skills/Experience):
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
• 5+ years related work experience or an equivalent combination of education and experience
Preferred Qualifications (Desired Skills/Experience):
• Working knowledge with Root Cause Corrective Action (RCCA) tools such as 5-Whys or Fishbone, and/or the Company Problem Solving Model (BPSM)
• 1+ years of experience with commercial airplane operation, certification, safety requirements and procedures
• Working knowledge of FAA Regulatory Compliance and ODA procedures per 8100.15
• 1+ years of experience working with FAA or other regulatory agencies
• 1+ years of experience in Commercial Airplane-Systems design or analysis (e.g. Flight Controls, Hydraulics, Avionics, Fuels, etc.) or Systems Integration
• Pilot’s license
• Airframe & Powerplant (A&P) License
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/04/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Safety & Airworthiness Specialist 3
Company In-Service Safety Organization is looking for an Airworthiness & Regulatory Specialist (Mid-Level) to join our team in Everett, Washington.
As an investigator in the Company Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Company product safety by maintaining and restoring compliance with regulatory requirements.
Investigations typically follow the Company Problem Solving Model (BPSM) process, which provides a structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.
Position Responsibilities:
· For any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process.
· We coordinate closely with Company functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
· We work with the functional groups within Company to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
· We coordinate closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
· We partner with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Company Enterprise.
We value the ability to communicate complex technical issues with a large variety of audiences, to lead a group of diverse engineers and non-engineers, and to apply airplane level thinking to a variety of technical issues.? As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.
A successful Mid-Level candidate will have the following qualifications:
· Strong written and verbal communication skills
· Ability to work effectively with a diverse team
· Intrinsic aptitude for taking initiative, leading cross functional teams and projects
· Ability and willingness to take ownership of, and facilitate, work activities to ensure they are completed accurately, efficiently, and in a timely manner
This position is expected to be 100% onsite.? The selected candidate will be required to work onsite at Everett, WA.
Basic Qualifications (Required Skills/Experience):
· 6+ years related work experience or an equivalent combination of education and experience
Preferred Qualifications (Desired Skills/Experience):
· Working knowledge with Root Cause Corrective Action (RCCA) tools such as 5-Whys or Fishbone, and/or the Company Problem Solving Model (BPSM)
· 1+ years of experience with commercial airplane operation, certification, safety requirements and procedures
· Working knowledge of FAA Regulatory Compliance and ODA procedures per 8100.15
· 1+ years of experience working with FAA or other regulatory agencies
· 1+ years of experience in Commercial Airplane-Systems design or analysis (e.g. Flight Controls, Hydraulics, Avionics, Fuels, etc.) or Systems Integration
· Pilot’s license
· Airframe & Powerplant (A&P) License
Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.)
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/02/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Software Engineer 4 - 377511
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
Job Description
Designs, develops, tests, and maintains safety-critical embedded software across the full product lifecycle, ensuring compliance with industry, customer, safety, and regulatory requirements. Translates customer and Designs, develops, tests, and maintains safety-critical embedded software across the full product lifecycle, ensuring compliance with industry, customer, safety, and regulatory requirements. Translates customer and system requirements into robust, testable software architectures and detailed designs, implements and optimizes software components and algorithms for system integration and performance, and creates and maintains comprehensive documentation including requirements traceability, design descriptions, test plans, and release notes. Leads verification and validation activities (unit, integration, system, regression), produces certification evidence and safety artifacts, and debugs and resolves defects and field issues to maximize reliability and availability. Responds to user inquiries and technical support tickets, incorporates user feedback into prioritized improvements, and evaluates and adopts emerging technologies, tools, frameworks, and regulatory changes to keep the software and processes current. Establishes, monitors, and continuously improves development processes, toolchains, and KPIs to align teams with organizational objectives and industry benchmarks, plans and executes R&D projects and feasibility studies, and provides domain expertise on software architecture, safety analyses, compliance, and lifecycle practices. Performs software project management activities including schedule tracking, risk management, and resource planning, and manages software suppliers and partners by defining requirements, evaluating deliverables, and monitoring supplier performance to ensure product and process compliance with project plans and industry standards. System requirements into robust, testable software architectures and detailed designs, implements and optimizes software components and algorithms for system integration and performance, and creates and maintains comprehensive documentation including requirements traceability, design descriptions, test plans, and release notes. Leads verification and validation activities (unit, integration, system, regression), produces certification evidence and safety artifacts, and debugs and resolves defects and field issues to maximize reliability and availability. Responds to user inquiries and technical support tickets, incorporates user feedback into prioritized improvements, and evaluates and adopts emerging technologies, tools, frameworks, and regulatory changes to keep the software and processes current. Establishes, monitors, and continuously improves development processes, toolchains, and KPIs to align teams with organizational objectives and industry benchmarks, plans and executes R&D projects and feasibility studies, and provides domain expertise on software architecture, safety analyses, compliance, and lifecycle practices. Performs software project management activities including schedule tracking, risk management, and resource planning, and manages software suppliers and partners by defining requirements, evaluating deliverables, and monitoring supplier performance to ensure product and process compliance with project plans and industry standards.
Qualifications:
IGHOS Product Line DevOps (this role can split time between Mission Systems support and Avionics support)
Fluency in GitLab CI/CD
Automating build tool chains in GitLab runners
Guarding merges on regression test artifacts
Standing up simulations in containers
Configuring simulations for laboratory use, via a controlled, auditable process
Automating configuration of laboratory equipment, for nightly test runs, FQT, ad-hoc tests
Fluency in scripting in Windows and Linux environments
Fluency in Docker
Standing up the IGHOS PL development environments in BSF, using BSF Prosper golden paths, while maintaining OEM provided toolchains.s environment.
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years'
related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 05/04/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Structural Analysis Engineer 4
**Must be able to obtain a Secret Clearance.**
Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product''s environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Works under minimal direction.
• Describe the project/day-to-day activities they will be working on: Working on structural analysis on either military based large commercial derivative or the FEM for the B-1.
• Include 3 required skill sets that the candidates need to have:
o Hand Calcs
o FEM (Patran/Nastran)
o Ability to interpret drawings
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 01/13/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Airworthiness & Regulatory Engineer 4
Company In-Service Safety Organization is looking for an Airworthiness & Regulatory Engineer (Senior) to join our team in Everett, Washington.
As an engineer in the Company Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Company product safety by maintaining and restoring compliance with regulatory requirements.
Investigations typically follow the Company Problem Solving Model (BPSM) process, which provides a structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.
Position Responsibilities:
• For any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process.
• We coordinate closely with Company functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
• We work with the functional groups within Company to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
• We coordinate closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
• We partner with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Company Enterprise.
We value the ability to communicate complex technical issues with a large variety of audiences, to lead a group of diverse engineers and non-engineers, and to apply airplane level thinking to a variety of technical issues.? As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.
A successful Senior candidate will have the following qualifications:
• Strong written and verbal communication skills
• Strong ability to interact and communicate with Company senior management and technical peers from external Customers, including airlines and regulatory agencies
• Ability to lead, influence, and mentor a diverse team
• Intrinsic aptitude for taking initiative, leading cross functional teams and complex projects
• Ability and willingness to take ownership of, and facilitate, work activities to ensure they are completed accurately, efficiently, and in a timely manner
This position is located in Everett, WA. The selected candidate must be able to work 100% onsite.
Basic Qualifications (Required Skills/Experience):
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
• 9+ years related work experience or an equivalent combination of education and experience
Preferred Qualifications (Desired Skills/Experience):
• Working knowledge with Root Cause Corrective Action (RCCA) tools such as 5-Whys or Fishbone, and/or the Company Problem Solving Model (BPSM)
• 1+ years of experience with commercial airplane operation, certification, safety requirements and procedures
• Working knowledge of FAA Regulatory Compliance and ODA procedures per 8100.15
• 1+ years of experience working with FAA or other regulatory agencies
• 1+ years of experience in Commercial Airplane-Systems design or analysis (e.g. Flight Controls, Hydraulics, Avionics, Fuels, etc.) or Systems Integration
• Pilot’s license
• Airframe & Powerplant (A&P) License
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years'
related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/04/2026
Last Updated: 06/08/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
| Back to Advanced Job Search | |