Job Search Results

3 listings were found that matched your search words: Keywords: ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2026/06/08 Monday 10:11PM Pacific Time by ContractJobHunter. )

Listings 1 - 3

Go To My Job Tracker

Expand all descriptions

Manufacturing Engineer III

Description:
Position Purpose:.
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Manufacturing floor support, discrepancy rework planning, and engineering planning experience required
Catia V5, SmarTeam, SAP, and Solumina experience preferred
Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
Extensive SAP experience required.

Education:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years manufacturing engineering, planning, or related technical experience.

Principle Duties and Responsibilities:
Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). .
Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
Investigate and assist in preparing justification for equipment and facility requests.
Perform productibility studies from engineering drawings.
Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
Keep current on state-of-the-art manufacturing developments.
Incorporate Lean Manufacturing Methodology into existing and future processes.
Develop business case and present to management for process improvement approval.
Assume the duties of the ME Group Head in his/her absence.
Assign and review work of subordinate personnel.
Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
Lead/coordinate the implementation of projects between multiple orgs.
pply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
Support all Safety, Sustainability and Ergonomic Initiatives.
Author DRDI/DMT rework instructions to support effective corrective actions.
Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Job Number: 24-015
Job Location: Savannah, GA
Rate: $62/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Years
Start Date: ASAP
Input Date: 05/26/2026

Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer II

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives. .
• Aid in development and maintenance of Business Continuity Plan. .

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. .
• Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Job Number: 24-003
Job Location: Savannah, GA
Rate: $55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Years
Start Date: ASAP
Input Date: 05/26/2026

Manufacturing Engineer II - Weekend Shift

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
Author DRDI/DMT rework instructions to support effective corrective actions.
Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
Investigate and assist in preparing justification for equipment and facility requests.
Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
Incorporate Lean Manufacturing Methodology into existing and future processes.
With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
Support all Safety, Sustainability and Ergonomic Initiatives. .
Aid in development and maintenance of Business Continuity Plan. .

Additional Functions:
Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
Initiate and maintain accurate daily/weekly activity status based on work output, as required. .
Perform other duties as assigned.

Other Requirements:
Proven knowledge of Lean and/or Six Sigma principles.
Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
Lean Six Sigma Greenbelt Certification or higher preferred.

Job Number: 24-014
Job Location: Savannah, GA
Rate: $55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Years
Start Date: ASAP
Input Date: 05/26/2026


Back to Advanced Job Search